BSENISO14555-2006焊接.金属材料的电弧螺栓.docx

BRITISH STANDARD BS EN ISO 14555:2006 Welding 一 Arc stud welding of metallic materials The European Standard EN ISO 14555:2006 has the status of a British Standard ICS 25.160.10 British Standards British Standards NO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAW BS EN ISO 14555:2006 National foreword This British Standard was published by BSL It is the UK implementation of EN ISO 14555:2006. It supersedes BS EN ISO 14555:1998 which is withdrawn. The UK participation in its preparation was entrusted to Technical Committee WEE/-/1, Briefing committee for welding. A list of organizations represented on WEE/-/1 can be obtained on request to its secretary. This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application. Compliance with a British Standard cannot confer immunity from legal obligations. This British Standard was Amendments issued since publication published under the authority oi the btandaras roncy and Strategy Committee Amd. No. on 30 November 2006 Date Comments ? BSI2006 ISBN 0 580 49752 6  EUROPEAN STANDARD NORME EUROPEENNE EUROPAISCHE NORM EN ISO 14555October 2006ICS 25.160.10 EN ISO 14555 October 2006 ICS 25.160.10 English Version Welding - Arc stud welding of metallic materials (ISO14555:2006) Soudage - Soudage 古 Iarc des goujons sur les materiaux SchweiBen ? LichtbogenbolzenschweiBen von metallischen mdtalliques (ISO 14555:2006) Werkstoffen (ISO 14555:2006) This European Standard was approved by CEN on 22 September 2006. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the Central Secretariat or to any CEN member. This European Standard exists in three official versions (English, Frenc