600MV机组全厂性原则热力系统设计.docVIP

PAGE 1 PAGE 1 摘要 本篇论文首先介绍的是课题设计的背景与研究目的，然后对课题设计中涉及到的相关概念作出简要介绍，对发电厂热力系统常用的计算方法进行简要的叙述，然后运用热力系统中的常规计算方法对600MV机组全厂性原则热力系统设计进行计算。本文以哈尔滨汽轮机厂生产的NZK600-16.7/538/538型汽轮机为设计本体，结合实际生产运行中的各种情况和各项参数绘制焓熵图，使用了常规的原则性热力系统计算方法对机组的全厂性原则热力系统进行计算，主要包括了热力系统中各加热器汽水参数和抽气系数，以及热力系统的经济性指标的计算对计算结果进行分析。最后根据计算出来的数据和已知参数，对主要辅机设备和主蒸汽系统进行设计和计算。课题设计对热力发电厂的机组运行有着重要的意义，最后根据计算结果绘出全厂原则性热力系统图和全面性热力系统图各一张。 关键词：全厂原则性热力系统 汽水参数 热经济指标 PAGE 2 PAGE 2 Abstract This paper first introduces the is design topic background and research purpose, and related concepts of design issues related to make a brief introduction and brief description of commonly used calculation method of thermodynamic system in power plant, and then use the common calculation method of thermodynamic system is used to calculate the thermodynamic system of 600 MW unit plant the principle of design. The Harbin steam turbine plant production of NZK600-16.7/538/538 type turbine for ontology design, combined with the actual operation of the production of a variety of conditions and the parameters enthalpy entropy diagram drawing, using the conventional thermal system of principle calculation method of unit plant the principle of thermodynamic system calculation, mainly including the thermodynamic system in the steam water heater parameters and pumping coefficient of gas, and calculation of thermodynamic system of economic indicators of the calculation results were analyzed. Finally according to the calculated data and the known parameters, design and calculation of the main auxiliary equipment and main steam system. Finally, according to the calculation results draw the whole principle thermal system plans and comprehensive thermal system diagram, a design project of thermal power plant unit operation has important significance. Key words: thermal system in principle, a comprehensive thermal systems，Thermal Economic Indicators PAGE 3 PAGE 3 目录 TOC \o 1-3 \h \u 21366 摘要 1 31132 Abstract 2 11214 第一章