737NG飞机水平安定面前缘凹坑的处理.docxVIP

个人经验总结，可作为维修时的参考，不能作为维修依据。 个人经验总结，可作为维修时的参考，不能作为维修依据。 PAGE # 737NG飞机水平安定面前缘凹坑的处理 申明：本文仅作为维修时的参考，不能作为维修依据。如果本文的内容与现行 手册冲突，以手册为主。 This document does not amend or supersedeinformation contained in applicable manual. The information contains in this document is for reference only. If there is any con flict in this docume nt, applicable manu als is the determ ining authority. Disclaimer: Im by no means responsible for any losses if any arising from my contribution in this thread. All responsibility or liability for any losses or damages caused by this thread is disclaimed. Any comme nts in clud ing criticism and new ideas are welcome and would be highly appreciated. 适用性 本文描述了 737 NG飞机水平安定面前缘凹坑的 处理程序，适用于航线或定 检中发现凹坑后的处理，不适用于 C检中凹坑的修理。 本文描述的是凹坑的处理程序，而不是凹坑的修理程序。 本文不适用于757-200飞机，因为结构有本质区别。 依据 737 NG飞机水平安定面前缘凹坑的处理依据是SRM 55-10-01 ALLOWABLE DAMAGE 1 。 ALLOWABLE DAMAGE 1 - HORIZONTAL STABILIZER LEADING EDGE SKINS 4. Allowable Damage Limits D. De nts: 737-700 STRUCTURAL REPAIR MANUAL LEFT SIDE IS SHOWN, RIGHT SIDE IS OPPOSITE UPPER SURFACE IS SHOWN Page 102Nov 01. 2DC3 Page 102 Nov 01. 2DC3 55-10-01 Horizontal Stabll izer Leadirig Edge Skim LocalionsFigwe 101 (Sheet 1 of 2) 063d AJ01 I * I*. 0H Wlit | 粉E . 14 ..平 m 请以现行手册作为维修依据 737-700 STRUCTURAL REPAIR MANUAL 2. General Re move the damaged material as necessary. (卄 (3 Refer to 51^10-02 for llie inspection 日nd remove at damage. Refer lc 51-30-03 for possible sources of the ab asive aid ottier materials /Ou carl use to remove the damage. Refer to 51-30-05 For possible sources of the equipmenl and tools you can use Io remove the damage, (4} If countersink rivets are removed to dean up Itw damage, then do the steps that follow: I net al new nv^te that rave the sam? nnatenai ana diameter a the initial rivets, 1) 2} Usf? oversize rivets as necessary. It is optional to inslall NAS1399D blind tl\ els. If you install the NAS13a9D blind rivets, make an inspecticn al each 400 Hight hour interval. B. 4) Replace the blind rivets with soli