课程设计说明书-结合子的工艺规程及钻3-Φ6孔的夹具设计.docVIP

课程设计说明书 题目：结合子机械加工工艺以及钻3xΦ6孔工序专用夹具设计 院 (部) 专 业 学生姓名 学生学号 指导教师 课程名称 课程代码 课程学分 起始日期 PAGE PAGE III 摘 要 本次设计内容涉及了机械制造工艺及机床夹具设计、金属切削机床、公差配合与测量等多方面的知识。 结合子加工工艺规程及其钻3-Φ6孔的夹具设计是包括零件加工的工艺设计、工序设计以及专用夹具的设计三部分。在工艺设计中要首先对零件进行分析，了解零件的工艺再设计出毛坯的结构，并选择好零件的加工基准，设计出零件的工艺路线；接着对零件各个工步的工序进行尺寸计算，关键是决定出各个工序的工艺装备及切削用量；然后进行专用夹具的设计，选择设计出夹具的各个组成部件，如定位元件、夹紧元件、引导元件、夹具体与机床的连接部件以及其它部件；计算出夹具定位时产生的定位误差，分析夹具结构的合理性与不足之处，并在以后设计中注意改进。 关键词：机械加工；工艺规程；专用夹具；结合子。 ABSTRCT This design involves the machinery manufacturing process and fixture design, metal cutting machine tool, tolerance and measurement and other aspects of knowledge. Fixture design combined with sub process planning and drilling 3- Φ 6 hole is the design process design, including machining process design and fixture three. In process design should first of all parts for analysis, to understand part of the process to design blank structure, and choose the good parts machining datum, design the process routes of the parts; then the parts of each step in the process to the size calculation, the key is to determine the craft equipment and the cutting dosage of each working procedure design; then the special fixture, the fixture for the various components of the design, such as the connecting part positioning devices, clamping element, a guide element, fixture and machine tools and other components; positioning error calculated by the analysis of fixture, jig structure the rationality and the deficiency, pay attention to improving and will design in. Keywords: Machine work；PROC；Special fixture；Associator. 目 录 TOC \o 1-2 \h \u 30514 摘 要 I 13312 ABSTRCT II 15617 目 录 III 13041 序 言 1 28858 第一章 零件的分析 2 8512 1.1零件的作用 2 14334 1.2零件的工艺分析 2 2314 第二章 机械加工工艺规程的设计 3 27521 2.1 确定毛坯的的制造形式 3 17144 2.2 基准的选