[机器人]-Industrial Robots工业机器人.docxVIP

-----宋停云与您分享------ -----宋停云与您分享------ Industrial Robots There are a variety of definitions of the term robot. Depending on the definition used, the number of robot installations worldwide varies widely. Numerous single-purpose machines are used in manufacturing plants that might appear to be robots. These machines are hardwired to perform a single function and can’t be reprogrammed to perform a different function. Such single-purpose machines do not fit the definition for industrial robots that is becoming widely accepted. This definition was developed by the Robot Institute of America: A robot is a reprogrammable multifunctional manipulator designed to move material, parts, tools, or specialized devices through variable programmed motions for the performance of a variety of tasks. Note that this definition contains two words reprogrammable and multifunctional. It is these two characteristics that separate the true industrial robot from the various single-purpose machines used in modem manufacturing firms. The term reprogrammable implies two things: The robot operates according to written program, and this program can be rewritten to accommodate a variety of manufacturing tasks. manufacturing professionals.The first articulated arm came about in 1951 and was used by the U.S. Atomic Energy Commissions manufacturing professionals. The first articulated arm came about in 1951 and was used by the U.S. Atomic Energy Commissions in 1954 , the first programmable robot was designed by George Devol. It was based on two important technologies: Numerical control （NC）technology Remote manipulator technology Numerical control technology provided a form of machine control ideally suited to robots. It allowed for the control of motion by stored programs, these programs contain data points to which the robot sequentially moves , timing singals to initiate action and to stop movement, and logic statement so allow for decision-marking. Remote manipulator technology allowed a