锡林轴承盖零件的工艺规程及其钻2-Φ13孔的工装夹具设计.pdfVIP

设计说明书 题目：锡林轴承座零件的工艺规程及 2-Φ13 孔的工装夹具设 计 学 生： 学 号： 专 业： 班 级： 指导老师： 摘 要 本次设计内容涉及了机械制造工艺及机床夹具设计、金属切 削机床、公差配合与测量等多方面的知识。 锡林轴承座零件的工艺规程及钻 2-Φ13 孔的工装夹具设计 是包括零件加工的工艺设计、工序设计以及专用夹具的设计三部 分。在工艺设计中要首先对零件进行分析，了解零件的工艺再设 计出毛坯的结构，并选择好零件的加工基准，设计出零件的工艺 路线；接着对零件各个工步的工序进行尺寸计算，关键是决定出 各个工序的工艺装备及切削用量；然后进行专用夹具的设计，选 择设计出夹具的各个组成部件，如定位元件、夹紧元件、引导元 件、夹具体与机床的连接部件以及其它部件；计算出夹具定位时 产生的定位误差，分析夹具结构的合理性与不足之处，并在以后 设计中注意改进。 关键词：工艺、工序、切削用量、夹紧、定位、误差。 ABSTRCT This design content has involved the machine manufacture craft and the engine bed jig design, the metal-cutting machine t l, the common difference c rdination and the survey and so on the various knowledge. The reduction gear box body components technological process and its the processing hole jig design is includes the components processing the technological design, the working procedure design as well as the unit clamp design three parts. Must first carry on the analysis in the technological design t the components, underst d the components the craft redesigns the semi finished materials the structure, and ch ses the g d components the processing datum, designs the components the craft route; After that is carrying on the size computation to a components each labor step of working procedure, the key is decides each working procedure the craft equipment and the cutting specifications; Then carries on the unit clamp the design, the choice designs the jig each composition part, like locates the part, clamps the part, guides the part, to clamp concrete and the engine bed connection part as well as other parts; Position error which calculat