Eurotherm欧陆 425S系列用户手册.pdfVIP

Solid state contactors 425S Series User Manual © Copyright Eurotherm Automation 1995 All rights reserved. All reproduction or transmission in any form or using any procedure (electronic or mechanical, including photocopying and recording) without the written permission of EUROTHERM AUTOMATION is strictly prohibited. EUROTHERM AUTOMATION have taken particular care to ensure the accuracy of these specifications. However, in order to maintain our technological lead, we are dedicated to the continual improvement of our products and this may lead to modifications or omissions in the current specifications. We cannot be held responsible for any material or bodily damage, losses or costs incurred. Part No HA 174776 ENG Issue 1 Printed in France 11/96 425 user Manual 1 EUROPEAN DIRECTIVES MARK The CE Mark of 425S products implies that the essential protection requirements of the European Low Voltage Directive are observed. ELECTROMAGNETIC COMPATIBILITY (EMC) For industrial environments, excluding residential environments Eurotherm certifies that the 425S products, when installed and used in accordance with their User Manual, meets the following EMC test standards and enables the system or installation in which there are installed to comply with the EMC Directive in regards to the 425S products. EMC STANDARDS Immunity Generic Standard : EN 50082-2 Test Standards : EN 61000-4-2, EN 61000-4-4, ENV 50140, ENV 50141 Emissions Generic Standard : EN 50081-2 (see filter