某公司TDLTE的KPI介绍.ppt

LTE FDD的ENB测量对象编号范围780---799。目前规划了4种测量对象：小区类型，小区对类型，eNodeB类型，eNodeB传输IP链路类型。 LTE FDD的ENB测量类型编号由OMC进行统计划分编排的。范围为37320---37399，总个数为80个。 计数器是整个组织结构的叶子，是架构的最终单元。每个计数器的编号要求在OMC系统唯一，我们对计数器的编号根据其所属的测量类型编号+网元内唯一的计数器编号构成。 网络的KPI指标是衡量网络性能的重要依据。LTE的KPI从大的分类上分为PI和KPI，PI是一般普通的指标,KPI是关键性的指标。OMC对PI和KPI的编号是同一规划的。PI的范围是310000-310499，总共500个指标；KPI的范围是310500-310799，300个指标。 * 注意： 1、有些KPI可以（也需要）通过Counter获取（counter based KPI） 有些KPI无法通过Counter获取，例如 U-Plane Latency 2、KPI/counter是一种测量，需要通过OAM方式定义测量对象， 下发测量任务，收集测量报告。只有counter based KPI才能通过 OAM方式获取和显示。 * * 小目录页删掉 * * * Sampling Point 1: The EUTRAN(Evolved Universal Terrestrial Radio Access Network)receives the RRC CONNECTION REQUEST message fromthe UE and selects to set up the RRC connection through the CCCH. Sampling Point 2: The EUTRAN sends the RRC CONNECTION SETUP message to the UE. Sampling Point 3: The EUTRAN receives the RRC CONNECTION SETUP COMPLETE message from the UE, indicating that the RRC connection has been set up successfully. * Sampling Point 1: The EUTRAN receives the INITIAL CONTEXT SETUP REQUEST message from the MME. Sampling Point 2: The EUTRAN sends the INITIAL CONTEXT SETUP RESPONSE message to the MME, indicating that the E-AB(Evolved Radio Access Bearer) Establishment has been set up successfully. Sampling Point 3：The EUTRAN receives the E-RAB SETUP REQUEST message from the MME. Sampling Point 4：The EUTRAN sends the E-RAB SETUP RESPONSE message to the MME, indicating that the E-RAB Establishment has been set up successfully. * * * * Sampling Point 1: The EUTRAN sends the E-RAB RELEASE INDICATION message to the MME. E-RAB Drop Rate = (C373210371+C373210372+C373210373+C373210374+C373210375+C373210376 +C373210377+C373210378+C373210379+C373210380+C373210381+C373210382 +C373210383+C373210384+C373210385+C373210386+C373210387+C373210388) /(C373210200+C373210206+C373210212+C373210218+C373210224+C373210230 +C373210236+C373210242+C373210248+C373210254+C373210260+C373210266 +C373210272+C373210278+C373210284+C373210290+C37321