《金属塑性成形材料模型的实验测量与程序实现》课程教学大纲.docVIP

PAGE PAGE 2 金属塑性成形材料模型的实验测量与程序实现 一、课程介绍 金属塑性成形是几何、物理和边界条件三重高度非线性的复杂过程，现有的塑性力学解析理论还不能用于塑性工程问题的求解。随着现代数值技术的发展，有限元方法已成为分析金属塑性成形复杂问题的主要工具，而材料模型是有限元建模的关键，其准确度直接影响有限元模拟精度。本课程围绕金属塑性成形材料模型研究和应用的最新进展，阐述金属材料流变曲线、本构模型、屈服准则、摩擦、失稳和断裂准则等理论基础，着重介绍相应的实验测量方法、材料参数识别手段以及材料模型在有限元程序中的实现途径。 本课程所讲述的内容有金属塑性成形理论、实验测量方法、实验设备、程序设计和软件开发基础等，共24学时，包含理论20学时和实验4学时。 Introduction Metal forming is a complicated process with the nonlinearities of geometry, physics and boundary conditions. The existing analytical theories of plastic mechanics cannot be used to solve the problems in plastic forming. With the development of modern numerical techniques, the finite element analysis has become the main tool for analyzing the complex problems in metal forming. Material models are the key to the finite element modeling, whose accuracy directly affects the precise of finite element simulation. This course focuses on the latest development in the research and application of material model during metal plastic forming, and explains the theories of flow curves, constitutive models, yield criteria, friction, instability and fracture criteria etc., and emphatically introduces the corresponding experimental measurement methods, the identification of material parameters, and the realization of material models in the finite element software. The content of this course includes metal forming theory, experimental methods of material properties, experimental apparatus, programming design, software development and so on.It will take 20 theoretical lessons，4 lab tutorials. 课程基本信息 课程名称 金属塑性成形材料模型的实验测量与程序实现 课程编码 432538 英文名称 Characterization and programming of material models in metal plastic forming 课程学时 24 课程学分 1.5 课程类别 专业教育课程 课程性质 选修课 开课学期 第7 学期 课内实验学时 4 适用专业 材料成型及控制工程 开课单位 材料加工工程系 选用教材 1.《金属板材成形工艺本构模型及数值模拟》.科学出版社，2015年.Dorel Banabic. 2.《屈服准则与塑性应力-应变关系理论及应用》.高等教育出版，2014.王仲仁主编. 主要参考书 1.《Fundamentals of Materials Modeling for Metals Processing Technologies》. Imperial College Press (UK) ,2015.Jianguo Lin. 2.《材料加工过程实验建模