PATRAN 21_施加加速度下的直接瞬态响应.pdfVIP

Workshop 15-1 Direct Transient Response with Enforced Acceleration • Workshop Objectives – Learn how to set up and perform a Direct Transient Response Analysis with structural damping, by determining the transient response of a flat plate due to an enforced acceleration sine pulse. – Learn how to create acceleration and displacement X-Y graphs at different locations in your model. • Software Version – Patran 2017.0.2 – MSC Nastran 2017.1 • Files Required – WS15-1_plate_model.bdf (NASTRAN and PATRAN paths) – WS15-1_nastran_input.bdf (NASTRAN path) 3 Direct Transient Response with Enforced Acceleration © 2018 MSC Software Corporation • Problem Description – Below is a finite element representation of a flat plate model. The diagram below shows the load and boundary condition. – Using the Direct Method, determine the Transient Response due to a unit acceleration sine pulse of 250 Hz applied at the base in the Z-direction. – Use a structural damping coefficient of g = 0.06 and convert this damping to equivalent viscous damping at 250Hz. Unit Acceleration sine pulse of 250 HZ applied vertically Length 5 in Height 2 in Thickness 0.1 in Weight Density 0.282 lbs/in3 2 Mass/Weight Factor 2.59E-3 sec /in Elastic Modulus 30.E6 lbs/in2 Poisson’s Ratio 0.3 Fixed end of plate (free in vertical direction) 4 Direct Transient Response with Enforced Acceleration