气泵连接后端阀体模具设计及模流分析 .docVIP

STYLEREF 标题 1 Ⅰ 中文摘要 PAGE I 毕业设计（论文） 正文 设计（论文）题目：气泵连接后端阀体模具设计及模流分析 摘 要 从塑料模具的发展趋势过程可以看到，在未来的模具行业市场中，注塑模具将占模具市场的绝大部分。人类的生活已经离不开塑料，随着塑料注塑模具行业的新技术不断涌现，研究塑料制品的成型将会变得十分有意义。 本文研究的是气泵连接后端阀体的模具设计及模流分析。首先分析产品的成型工艺，然后根据产品结构，设计如何分型及型腔数目，进胶方式。过程中要充分考虑到零件的加工方法，尽量简便精准，并进行相关尺寸的计算和校核，再设计浇注系统，冷却系统，排气系统，脱模机构，导向机构，以及模架的选择。通过CAD，UG ，moldflow等软件辅助分析设计是否合理，选择合理的工艺参数和设计方案。 关键词：注塑模具；成型工艺；结构设计；加工方式 目录 PAGE PAGE 1 PAGE PAGE V 英文摘要 PAGE 1 ABSTRACT From the development trend of plastic mold can be seen, the development of injection mold will be much higher than other mold in the future. Human being can’t be separated from plastic and along with new technologies of plastic injection mold industry constantly emerging, the research on the formation of plastic products will become very meaningful. In this paper, I study the injection molding of the air pump end valve body and its moldflow analysis. Firstly, I will analyse the forming process of the product, and then according to the product structure, design how to type and the number of cavity, and the way of the glue inlet. In the above process must to take the processing methods into account fully, making it as far as possible simple and accurate, calculating and checking the related dimensions. Next, I will determine the design of gating system, cooling system, exhaust system, demoulding mechanism, guiding mechanism, and make a choice about mold. Making the use of the CAD, UG, Moldflow and other aided analysis software to ensure that the design is reasonable, and select the reasonable process parameters and design scheme. Key Words：Injection mold; Molding process; Structure design; Processing methods  目 录 TOC \o 1-3 \h \z \u 1 引言 1 2 工艺分析 2 2.1 原始设计依据 2 2.2 塑件材料及成型特性分析 2 2.3 塑件的结构与工艺性分析 3 2.3.1 脱模斜度 3 2.3.2 塑件的壁厚 3 2.3.3 塑件的圆角 4 3 模流分析 5 3.1 网格的划分 5 3.2 网格的修改 5 3.3 确定浇口位置 6 3.4 浇注系统的创建 6 3.5 冷却系统的建立 7 3.6 产品缺陷的分析 7 3.6.1 熔接线 7 3.6.2 翘曲结果分析