基于新型抗磨工具的水平钻杆动力学和抗磨特性研究外文文献翻译、中英文翻译、外文翻译.docVIP

Dynamics and anti-friction characteristics study of horizontal drill string based on new anti-friction tool Jialin Tian, Yinglin Yang, Liming Dai Lin Yang To cite this article: Jialin Tian, Yinglin Yang, Liming Dai Lin Yang (2021) Dynamics and anti-friction characteristics study of horizontal drill string based on new anti-friction tool, International Journal of Green Energy, 18:7, 720-730, DOI: 10.10802021.1880909 To link to this article: /10.10802021.1880909 ABSTRACT In the drilling process of a horizontal well, the large drilling friction between the drill string and the wellbore wall can cause the phenomenon of backing pressure and reduce drilling efficiency. To reduce the drilling friction, a new anti-friction tool is proposed and then dynamics and anti-friction characteristics of the horizontal drill string are studied. According to the actual working conditions, the force analysis of the drill string system is conducted. The dynamics model of the drill string is established and the vibration anti-friction characteristics of the drill string are studied. The numerical solution method is used to solve the dynamics model and the experimental test is conducted to verify the structural design of the new antifriction tool. According to the theoretical calculation results, the variation law of the average friction, the vibration characteristics, and the bit rotation velocity response under different initial conditions are obtained, and the experimental test result shows that a new anti-friction tool can generate axial vibration. For the force acted on the drill bit from the rock, the actual solution steps and results are complicated and the influence factors are numerous. Through the theoretical and experimental study, the design and development of new downhole antifriction tools can be improved, which is beneficial to solve the problem of large drilling friction in horizontal wells and can provide technical support for high efficiency oil