半自动智能V带长度分拣机中英文翻译、外文文献翻译、外文翻译.docVIP

Semi-automatic intelligent V belt length sorter V product is the ring without a joint, V group use, due to differences in length, numerical tension per root zone under different. High tension band V will damage early; small tension band V, ability did not get to play, leading to reduce the system transmission efficiency. Therefore the national standard GB\/T13575.1-92. regulations, the V various models with extreme deviation and assembly tolerance values.V belt manufacturer should be according to the national standards, the sorting of V with finished product testing, grouping, and hit the mark, choose to facilitate the users. It is very difficult but finished the work by manual measurement. The automatic V belt sorting machine is a kind of high efficient equipment, but the price is expensive. Therefore, the majority of small and medium-sized manufacturers need a capable of sorting, and low price, using special equipment, repair, debugging convenient. This machine is designed to solve the problems mentioned above to a semi-automatic intelligent V belt length sorting machine. The main research contents and the results are: 1) for the V belt sorting design, financial PLC, modern sensor technology, mechanical, pneumatic technology in one, a typical electromechanical integration equipment; 2) the use of modern sensor technology, conversion between the displacement and detection based on pulse number; Detection of pulse number of packet, to realize the indirect measured packet with long; the number of print pulse corresponds to mark the corresponding, automatically printing the mark; 3) with PLC as the core control unit to realize intelligent control, were detected with the model change, mainly by adjusting the application software to complete the task of transformation, to achieve the performance the price is higher than the; 4) according to the characteristics of V with a daily production capacity of large, through the automatic detection and printing integration, to