用于三维显示消像差复合柱镜光栅的研究.docVIP

  Anaberrational lenticular lens for autostereoscopic display Peng Xichun, Sang Xinzhu** (State Key Laboratory of Information Photonics and Optical Communications, Beijing University 5 10 15 20 25 of Posts and Telecommunications, Beijing 100876) Abstract: In this paper, an anaberrational lenticular lens for autostereoscopic display is proposed. A single lenticular lens for autostereoscopic three dimensional display is a tranditional method, but it results in serious aberration. To overcome this problem, the anaberrational lenticular lens is designed. The simulation verify that the proposed anaberrational lenticular lens could reduce aberration and display better than tranditional single lenticular lens in image quality. Keywords: aberration; lenticular lens; image quality measure; optimization 0 Introduction January 1, 2012, Chinas first 3D TV channel has already begun to broadcast. 3D TV is a major initiative to promote cultural development and prosperity. Now Chinese people have 500 million TV sets, and 3D TV would promote anew culture of consumption and expand domestic demand to upgrade TV set, which could contribute to the real economy. There are various techniques to realize autostereoscopic three dimensional displays [1]–[3]. Particularly, the autostereoscopic 3D display using lenticular lens has long been recognized [4]–[6]. As we know, the lenticular lens is one of the key factors which determine the characteristics of the autostereoscopic 3D displays [7]–[9]. Its essence is using spectroscopic characteristic of the lenticular lens to project three-dimensional images onto the left and right eye, forming a parallax in the retina, and the brain systems would feel a three-dimensional visual. But a single lenticular lens for autostereoscopic three dimensional display usually results in serious aberration. In this paper, the anaberrational lenticular lens for the autostereoscopic 3D display is proposed to avoid image aberration. 1 Principle of the anaberratio