温度试验装置的节能改造.pdfVIP

温度试验装置的节能改造 摘 要 本设计是按照工程自控设计的要求，分析控制对象的特点，控制方式是单 回路简单控制系统，掌握温度常规控制的构成环节，PID参数的求取及控制系 统的投运，对过程控制实验室温度实验装置的节能改造设计，并解决长期以来 调节器参数不太科学合理，造成实验时调节控制误差大，实验效果不理想。另 外，原实验装置因为当时的设计问题，在做实验时，使实验中的水大量浪费， 为此，本次毕设专门针对这个问题，对原实验装置进行了结构改造，取得了不 错的效果。 关键词：PID参数、单回路控制、调节阀 -I- 温度试验装置的节能改造 Abstract This design is according to engineering from request that control the design, the characteristics of the analysis control object, control way is hurl that the composing link that the single back track controls the system in brief, control the temperature normal regulations control, the parameter of PID begs to take and control the system carry, control to the process the economy energy that laboratory temperature experiment device reforms design, combine solution for long time modulator parameter not too science is reasonable, resulting in the hour of experiment regulate to control the error margin big, the experiment result ignore to think.Moreover, the original experiment equips because of the design at that time problem, in did experiment, made experiment of water large quantity is wasted, for this, this time finishes to establish to aim at this problem exclusively, equiping to proceed to the original experiment the construction reforms, obtaining the quite good result. Keywords:The parameter of PID, single back track control, regulate the valve -II- 温度试验装置的节能改造 目 录 第一章 概 论 _________________________________________________ 1 第二章 工艺流程综述 ____________________________________________