输出轴CA640车床2Φ8孔的机械加工工艺规程与工艺装备设计.docVIP

辽宁工程技术大学 课 程 设 计 题 目：输出轴（CA6140车床）一、设计题目　　 输出轴（CA6140车床）包括 本文首先介绍了输出轴的作用和工艺分析.然后，根据零件的性质和零件图上各端面的粗糙度确定毛坯的尺寸和械加工余量。最后拟定钻孔的工艺路线图，制定该工件的夹紧方案，画出夹具装配图。 本次课程设计主要是应用机械制造技术，是一次深入的综合性的总复习 Abstract Designing that this time is that the CA6140 lathe exports 2*Φ8 holes. The part including the workpiece being processed pursues , the workpiece blank pursues , clamp assembling picture , the clip pursue concretely every sheet, the machine work procedure card draws and the working procedure card takes a look respectively once. The part , handicraft frock design and reform exporting axis main part as the powe