超导涂层导体中NiO缓冲层的制备与研究.pdfVIP

F4 超导涂层导体中 NiO 缓冲层的制备与研究 * 张红 赵勇 张欣 王贺龙 蒲明华 潘敏 （西南交通大学超导研究开发中心,材料先进技术教育部重点实验室, 成都 610031） 摘要： 镍基带上制备超导涂层导体产生的一个重要问题就是镍基带的自发氧化问题，简单有效的方法就是提前在空气中制备织构 的NiO薄膜。本文研究了在空气中使用表面氧化外延的方法制备NiO薄膜。高温短时有利于制备高织构度且平整致密的NiO薄膜， 我们选取了最佳温度和时间制备了高织构度且致密平整的NiO薄膜，并在NiO上沉积制备了SmBiO3 缓冲层，为进一步超导层的制 备提供了良好的条件。 关键词：涂层导体；NiO缓冲层；氧化外延；织构 Preparation and study of NiO buffer layer for superconducting coated conductor * Hong Zhang ,Yong Zhao ,Xin Zhang,Helong Wang ,Minghua Pu,Min Pan (Key Laboratory of Advanced Technologies of Materials (Ministry of Education of China), and Superconductivity RD Center (SRDC), Southwest Jiaotong University, Chengdu, Sichuan 610031 China) Abstract: A randomly oriented NiO growth is an important problem for the preparation of superconducting coated conductor. A simple and valid method is to prepare textured NiO film on the bare nickel tape in air. In this paper, NiO film was prepared by the surface oxidation epitaxial method. High temperature and short time are in favor of the growth of smooth and densification NiO film. We obtained the smooth and densification NiO film at optimal temperature and for optimal time. The buffer layer of SmBiO3 was fabricated on the NiO film. This provides a good substrate for preparing superconducting layer. Key words : Coated Conductor, NiO buffer layer, oxidation epitaxy, texture 225