汽车覆盖件冲压工艺规划建模技术的研究.pdfVIP

287 产品创新开发技术——建模仿真与多学科优化技术 汽车覆盖件冲压工艺规划建模技术的研究 1 1 2 陈 鹏 ，李宗斌 ，杨晓春 ，杜 轩 (1.西安交通大学 机械制造系统工程国家重点实验室，陕西 西安 710049； 2.中国航天科技集团 九院第十六研究所，陕西 西安 710100) 摘要：为了提升工艺规划的智能化程度，首先，应用多色集合理论建立了基于特征的汽车覆盖 件信息模型。其次，利用多色集合建立了汽车覆盖件冲压工艺特征映射模型，实现了汽车覆盖件从 设计特征到工艺特征的映射。在此基础上，提出了一种基于规则的工艺方案推理算法，并进行了汽 车覆盖件冲压工艺规划的推理研究。最后以汽车后盖板零件为例对所提出的模型与算法进行了验证。 关键词：多色集合理论；汽车覆盖件；建模技术 中图分类号：TH162 文献标志码：A The Research on Stamping Process Planning of Automobile Panels by Using Modeling Technology 1 1 2 CHEN Peng , LI Zong-bin ,YANG Xiao-chun (1.State Key Laboratory for Manufacturing Systems Engineering, Xi′ an Jiaotong University, Xi′ an 710049, China; 2.The 16th Institute of the Ninth Academy of CASC, Xi′ an 710100, China) Abstract ：As the key point for the development of automobile panels, process planning directly affects the quality, cost, productivity of products and the service life of die. In order to enhance the automation of process planning, a feature-based information model of automobile panels based on polychromatic sets theory is constructed. Then based on a feature mapping model which converts design features to process features using polychromatic sets theory, stamping process planning is studied by means of rule-based reasoning algorithm of automobile panels. At last, the proposed model and algorithm are verified with the rear cover as example. Key words ：polychromatic sets theory; automobile panels; modeling technology 0 引言 汽车覆盖件大都具有空间曲面，厚度薄，平面尺寸大等特点，其冲压工艺规划是一个十分复杂的决策 和设计过程[1