基于Solidworks的面条包装机构的设计【毕业论文】.docVIP

本科毕业论文 （20 届） 基于Solidwoks的面条包装机构设计 现今，面条包装机的需求量很大，自动化程度却相对较低，不能满足面条生产的需求。本文设计了一套适合现代化高速生产所需要的面条端面的机构，。通过Solidworks软件完成了、、、零件的设计。本机构能够在面条生产线中与其他工序衔接，提高生产效率。 关键词：包装Solidworks；翻折机构Abstract The rapid development of food industry and people to food needs increasing. Required food producers production skills continuously in ascension. In the process packaging is a important link， fast and effective packaging machine not only accelerated food packaging increases the safety and reliability of the packing. Make manufacturer of effective and safe to sell its products. And the design software with 3d surround can better aided design personnel to food packing installed design， meet manufacturers requirements. At the same time， Chinas rapid development， packaging industry in the world of packaging industry already occupied a very important position， China is gradually towards packaging from packing powers. Increase the packaging industry production development is very necessary. Packaging machinery design generally use simulation design technology. The various machine unit， placed in a computer database form after drawing by digital input computer automatic computer synthesis， 3d model; Put the actual production index and data， a possible fault input computer. The computer 3d model according to the actual working conditions can be operation， the demo out production capacity， product rate， production links matching， production line where etc， also bottlenecks can be modified model according to users opinion until customer satisfaction. After using computer simulation technology， shorten packaging machinery design cycle and new product development cycle. Nowadays because of low degree of automation of packaging machine for noodles， production of noodles can not meet therequirement. In this paper， based on the folding characteristic of the paper packaging for noodles， a modern high-speed mechanism to fold the end of noodles package was designed. Four folders were driven through