核桃振动式分选机总体设计.docVIP

核桃振动式分选机总体设计 摘 要 我国的振动分选机在运行和维修方面中存在着大量的问题。这些问题突出表现在筛箱断梁、裂帮,稀油润滑的箱式振动器漏油、齿轮打齿、轴承温升过高、噪声大等问题,同时伴有传动带跳带断带等故障。这类问题直接影响了振动的使用寿命,严重影响了生产Abstract China since reform and opening, vibrating screen industry have seen significant development. In particular, the 21st century, exists in all walks of life in the shaker. However, vibrating screen career started late in China, rapid development, therefore, in the vibrating screen operation and maintenance, there are many problems. These problems highlight the performance of the sieve box off beam, crack help, dilute oil lubrication in the box vibrator oil spills, fight gear teeth, bearing temperature rise too high, noise, etc, and accompanied with a jump drive with a belt and other faults. These problems directly affect the life of a shaker, has seriously affected production. ZKB3660 linear vibrating screen can solve such problems, the series of vibrating screen is widely used in screening industrial and mining machinery, used as the material of the screening, grading, washing, using the two-motor direct drive, instead of mandatory synchronous gear drive, vibration track a straight line. Overcome in the past as a single shaker motor drag, caused by the gear drive gear forced lubrication, closed questions, thereby increasing the life of the shaker. Design and Analysis discusses the design, including the classification and characteristics of vibrating screen, the movement of materials analysis, Dynamic analysis of shaker and kinetic parameters, including both the original design parameters, motor design and verification; for a major Parts of the design and calculation of spring design and calculation and so on. Keywords: Linear, Shaker-style, Spring motor ,Eccentric block 目 录 1.绪论 5 1.1振动筛国内外的现状及发展趋势 5 1.1.1国内振动筛研究现状及发展趋势 5 1.1.2国外振动筛研究现状及发展趋势 5 1.2研究课题的内容及要求 6 1.3本课题研究的目的意义 6 2.设计方案的确定 7 3.振动分选机总体设计 8 3.1振动筛的选型及工作原理 8 3.2整体方案的确定及其结构特点 8 3.2.1筛箱 9 3.2.2支撑装置 10 4.振动分选机的设计计算 11 4.1筛面上物料的运动分析 11 4.2工艺参数的选择 11 4.3运动学参数的确定 12 4.