第四章(计算机说明书)课件.pptVIP

第4章 计算机说明书 4.1 视图说明书 4.2 故障排除 4.3 安全说明 4.4 硬件安装说明 4.4.1组装计算机 4.4.2连接一台已组装好的PC机 4.4.3PC机启动的步骤 4.1 视图说明书（7-1） Dell? E198WFP Flat Panel Monitor Users Guide Front View 4.1 视图说明书（7-2） Back View 4.1 视图说明书（7-3） Bottom View 4.1 视图说明书（7-4） Monitor Specifications（Omitted.） Power Management Modes If you have VESAs DPM? compliance display card or software installed in your PC, the monitor automatically reduces its power consumption when not in use. This is referred to as Power Save Mode. The monitor automatically resumes functioning when the system detects input from the keyboard, mouse or other input devices. The following table shows the power consumption and signaling of this automatic power saving feature: （Omitted.） Pin Assignments（Omitted.） 24-pin Digital-only DVI Connector(Omitted.) Plug and Play Capability You can install the monitor in any Plug and Play-compatible system. The monitor automatically provides the computer with its Extended Display Identification Data (EDID) using Display Data Channel (DDC) protocols so that the system can configure itself and optimize the monitor settings. Most monitor installations are automatic. You can select different settings if required. 4.1 视图说明书（7-5） To clean your antistatic screen, slightly dampen a soft, clean cloth with water. If possible, use a special screen-cleaning tissue or solution suitable for the antistatic coating. Do not use benzene, thinner, ammonia, abrasive cleaners, or compressed air. Use a slightly dampened, warm cloth to clean the plastics. Avoid using detergent of any kind as some detergents leave a milky film on the plastics.? If you notice a white powder when you unpack your monitor, wipe it off with a cloth. This white powder occurs during the shipping of the monitor. Handle your?monitor with care as darker-colored monitor may scratch and show white scuff marks more than lighter-colored monitor.? To help maintain the best image quality on your monitor, use a dynamically changing screen