磁集成开关变换器的小信号建模方法.pdfVIP

2013 年全国电气工程博士后学术论坛论文集 磁集成开关变换器的小信号建模方法 1 2 1 卢增艺 ，陈为 ，章进法 （1.台达电子企业管理(上海)有限公司 上海 201209 2.福州大学电气工程与自动化学院 福州 350108） 摘要：为了全面地认识和客观评价磁集成技术对开关变换器稳态和动态性能的影响，需 要建立磁集成开关变换器的小信号模型。论文以集成磁件分析方法为基础，结合状态空间平 均法，分别提出三种磁集成开关变换器小信号建模方法，为这类变换器的动态特性研究和控 制设计建立理论基础。以磁集成有源箝位正激变换器为研究对象，分别对这三种建模方法做 详细阐述。 关键词：磁集成；小信号建模；状态空间；正激变换器 中图分类号：TM55 Small Signal Modeling Methods of Switched-Mode Converter with Magnetic Integration 1 2 1 Lu Zengyi Chen Wei Zhang Jinfa （1. Delta Electronics (Shanghai) Co., Ltd. Shanghai 201209 2. Fuzhou University Fuzhou 350108 ） Abstract: In order to fully understand and objectively evaluate the influence of magnetic integration technology on the performances of switched-mode converter at steady state and transient, it needs to establish its general small signal model. In this paper, based on the approaches to analyze integrated magnetic component and combined with the state-space averaging method, three small-signal modeling methods of switched-mode converter with magnetic integration have been respectively proposed. These help to establish a theoretical foundation for its dynamic characteristics research and control design. An active clamped Forward converter with magnetic integration has been taken as example to illustrate the proposed modeling methods in depth. Keywords: Magnetic Integration; Small Signal Modeling; State-Space; Forward Converter 某个特定运行条件下的电气性能，容易忽略来自 引言 其他不同支路的实时和动态的关联耦合。 磁集成技术是对现有开关变换器