某化工企业塑料改性剂(ACM)建设项目职业病危害预评价.pdfVIP

中国职业安全健康协会 2013 年学术年会论文集 某化工企业塑料改性剂（ACM ）建设项目职业病危害预评价 刘梅 靳建超 （滨州市安和安全技术研究院有限公司评价部，滨州山东 256600 ） 【摘 要】目的 识别、评价和分析建设项目可能产生及存在的职业病危害因素，预测其对劳 动者健康的危害程度；对企业拟采取的职业病危害防护设施进行分析与评价，提出相应职业病危害 防护措施，为安监部门审批建设项目提供可行的技术依据。方法 选择与该建设项目类似工艺的企 业进行类比调查，采用类比法、检查表法相结合的原则进行评价。结果 本建设项目选址与总体布 局、生产设备布局、拟采取的职业病防护设施设计、辅助用室的卫生设施配置等基本符合国家有关 规定。本项目可能产生的主要职业病危害因素有：粉尘、化学毒物(包括氯、氯化氢、氢氧化钠) 、 噪声。类比企业粉尘、氯化氢、噪声检测合格率 100%，氯气检测点 11 个，合格率 90.9% 。结论 该 建设项目属于严重职业病危害项目，项目拟采取的职业病危害防护设施，基本符合国家职业卫生标 准和卫生要求，该项目是可行的。 【关键词】塑料改性剂；职业病危害；预评价 Pre-evaluation of occupational hazard for construction project of ACM production in a chemical company Liu Mei, Jin Jianchao Binzhou AnHe safety technology research institute company limited, evaluation department Binzhou Shandong, 256600, China Abstract: Objective To identify, evaluate and analyze of possible occupational disease hazard factors in this construction project for predicting the effects on the health of workers; to evaluate and analyze the effects of the equipment for occupational disease hazard control and provide the feasible and efficient measures against the occupational exposure. To provide scientific evidence for the inspection by safety supervision departments on this construction project. Methods Analogizing was used by selecting a company which is similar to this construction project. The assessment is proceeded by using combination of principle of checklist and analogizing methods. Results This construction project items including the selection of site, the overall layout, the arrangement and layout of the facilities, occupational disease prevention and protection measures, the hygiene equipment of auxiliary workplaces meet the requirements of the