不同温度下微波烧结Fe-Cu-C的性能研究.pdfVIP

不同温度下微波烧结Fe—Cu—C的-眭能研究 彭元东易健宏郭颖利罗述东李丽娅 (中南大学粉末冶金国家重点实验室，湖南长沙，410083) 摘要：论文对Fe--2cu一0．6C粉末冶金材井的微波烧结进行了探索性的研究，研究了不同烧蛄温度下的世袁烧 鲒样品的性能和显截组织，井与相同素件下的常规烧结样品进行对比．实验结不表明，与常规烧蛄相比，氍波烧蛄 可得到较高的烧蛄密度、两者的洛氏硬度(HlRB)相当。以覆高的抗拉强度和延伸率；饭波烧蛄样品在1150℃性能 量佳，密度为7．20 g／c一．抗拉强度为413．90MPa，洛氏硬度为HRB75。通过全相显截分析表明：微波烧蛄有着置 好的擞垃鲒构．即小的、近圃彤且均匀分布的孔隙蛄构，从而也有利于获得细小的晶拉和高的致密度；微波烧鳍较 常规烧站有着更多片状和粒状珠光体，能显著改善其性能。 关键词：掇波烧姑；Fe—Cu—C寺全l力学性能；显微组织 of sinteredat Fe—Cu—C microwave Propertyanalyses alloys different temperatures PENG Yuandong，YfJianhong，GUOYingli，LUOShudong．LILiya (State forPcwder South 410083，CKm) K,yLaboratory Metallurgy，CenualU试versity，Changsha this hasbeenresearchedoilFe～2Cu一0．6(3met— Abstract：In sinlering powder paper．microwave material．The mierostructureofmicrowave havebeen allurgy propertiesand sinteringsample studiedatthedifferent and dwiththe safrl_ sinterlngtemperaturecompare conventional【sinteting sunderthesameeonditons．Theresultshowedthat withtheconventlonalsinte— ph compared resultedin sinteJ ed Tensile ring．n西crowavesintering higher density，higherstrength，elongation and theRockwellhardness(HRB)．The wasobtained approached optimumperformance equaHy at for10min forrnicrowavesintered sintered1150。C aintered was samples soaking．thedensity 7．20 whichwasthemaximum t