基于LabWindowsCVI的SDR接收机中阶梯式AGC算法的设计与实现.pdfVIP

2015 年第 1 期 信息通信 2015 （总第 145 期） INFORMATION COMMUNICATIONS （Sum. No 145） 基于LabWindows/CVI 的SDR 接收机 中阶梯式AGC 算法的设计与实现 刘星艳 兰州交通大学电子与信息工程学院，甘肃兰州730070 ） 摘要：现代宽带中频数字接收机以应用软件无线电技术最为热门，不仅接收频率范围广，而且调制解调类型丰富，更使许 多功能实现了可维护性和可扩展性。文章针对这一发展趋势，利用虚拟仪器软件LabWindows/CVI 建立了通用的软件 ( ) 无线电接收机模型，并在此基础上重点对自动增益控制 Automatic Gain Control,AGC 算法进行了研究和仿真分析，提出 了在ADC 后端控制中使用阶梯式AGC 微调算法的概念，对传统AGC 实现进行了改进。经过试验测试，实现了预期效 果。 关键词：SDR 接收机；阶梯式AGC 算法；LabWindows/CVI 仿真 图分类号：TN9 11.7 文献标识码：A 文章编号：1673-1131 2015 ）01-00 13-02 A design and implementation of a stepped AGC algorithm Based on LabWindows/CVI in SDR receiver LIU Xing-yan （School of Electronic and Information Engineering, Lanzhou Jiaotong University,Lanzhou 730070） Abstract:Software radio technology is hot in modern broadband IF digital receiver application , which not only can receive a wide frequency range, and rich modem types, even many features are realized maintainability and scalability. Aiming at this tre- nd, the use of virtual instrument software LabWindows/CVI to establish a common software radio receiver model, and on this basis, focusing on the AGC (Automatic Gain Control, AGC) algorithm is studied and simulation analysis, the concept of using fine-tune the algorithm stepped AGC control in the back-end ADC, the traditional AGC achieve improved. After a pilot test, to achieve the desired effect. Keywords: SDR receiver, stepped AGC algorithm, LabWindows simulation 0 引言 的要求较高，计算量大，控制频繁，对系统损耗大；后者控制简