1780热连轧机板形控制系统设计及应用.pdfVIP

Proceedings of the 29th Chinese Control Conference July 29-31, 2010, Beijing, China 1780热连轧机板形控制系统的设计及应用 董志奎，戚向东，岳晓丽，连家创，张文志 燕山大学 轧机研究所，河北 秦皇岛 066004 E-mail: dong-zhi-kui@163.com 摘 要:板形是板带材的重要质量指标之一，板形控制系统是板带热连轧生产中的核心技术之一。宁波钢铁1780热连 轧机是国内自行设计建造的热连轧生产线，其中板形控制系统完全由国内燕山大学自主开发和设计。宁波钢铁板形 控制系统主要由板形预设定系统、 凸度闭环控制系统以及模型自学习自适应系统组成。本文介绍了各部 的原理 和功能以及具体现场实现。通过对现场3种钢种11种规格的生产考核， 凸度命中率达到96%以上，板形良好。宁波 钢铁板形控制系统的成功开发和应用对改变我国大型热连轧机核心技术主要依靠引进具有重要意义。 关键词:热连轧机, 板形控制系统, 设计 Design and Application of Shape Control System of 1780 Hot Strip Mill DONG Zhi-Kui, Qi Xiang-Dong, Yue Xiao-Li, Lian Jia-Chuang, Zhang Wen-Zhi Rolling Mill Research Institute, Yanshan University, Hebei Qinhuangdao 066004,P. R. China E-mail: dong-zhi-kui@163.com Abstract: Strip shape is one of the important quality indices of plates and strips, and shape control system is one of the core technique of the hot strip production. Ningbo steel 1780 hot strip mill is a hot strip production line designed and constructed by ourself, where shape control system is developed and designed entirely by Yanshan University. Ningbo steel shape control system is composed of the strip shape presetting system, strip crown close-loop control system and model self-learning and adapting system. Specific site realization of every part is discussed in this paper. Production examination including three kinds and eleven gauges indicates that plate crown hit rate reaches above 96% and the strip shape is good. The successful development and application of Ningbo steel shape control system has an important significance to change the present situation that the domestic core technique of the large hot strip mill mainly depends on introduction.