Applications of High-Efficiency Abrasive Process with CBN Grinding Wheel英文文献资料.docVIP

Engineering, 2010, 2, 184-189 doi:10.4236/eng.2010.23026 Published Online March 2010 (http://www.SciRP.org/journal/eng/) Applications of High-Efficiency Abrasive Process with CBN Grinding Wheel Yali Hou , Changhe Li , Yan Zhou 1 1 2 College of Mechanical Engineering, Qingdao Technological University, Qingdao, China 1 2 Department of Mechanical Engineering, Qingdao Feiyang VocationalTechnical College, Qingdao, China Email: Sy_lichanghe@163.com, houyalichina@163.com, qingpiwuzi@163.com Received October 8, 2009; revised November 20, 2009; accepted November 26, 2009 Abstract High-efficiency abrasive process with CBN grinding wheel is one of the important techniques of advanced manufacture. Combined with raw and finishing machining, it can attain high material removal rate like turn- ing, milling and planning. The difficult-to-grinding materials can also be ground by means of this method with high performance. In the present paper, development status and latest progresses on high-efficiency abrasive machining technologies with CBN grinding wheel relate to high speed and super-high speed grind- ing, quick point-grinding, high efficiency deep-cut grinding, creep feed deep grinding, heavy-duty snagging and abrasive belt grinding were summarized. The efficiency and parameters range of these abrasive machin- ing processes were compared. The key technologies of high efficiency abrasive machining, including grind- ing wheel, spindle and bearing, grinder, coolant supplying, installation and orientation of wheel and work- piece and safety defended, as well as intelligent monitor and NC grinding were investigated. It is concluded that high efficiency abrasive machining is a promising technology in the future. Keywords: CBN Grinding, Super-High Speed Grinding, High Efficiency Deep-Cut Grinding, Quick-Point Grinding 1. Introduction grinding debris; 3) adopting powerful grinding to in- cr