Bandwidth Enhancement and Size Reduction of Microstrip Patch Antenna by Magnetoinductive Waveguide Loading英文文献资料.docVIP

Wireless Engineering and Technology, 2011, 2, 37-44 37 doi:10.4236/wet.2011.22006 Published Online April 2011 (http://www.SciRP.org/journal/wet) Bandwidth Enhancement and Size Reduction of Microstrip Patch Antenna by Magnetoinductive Waveguide Loading Jayant G. Joshi, Shyam S. Pattnaik, Swapna Devi, Mohan R. Lohokare Department of ETV and ECE, National Institute of Technical Teachers’ Training and Research, Chandigarh, India. Email: shyampattnaik@, joshij11@ Received January 11 , 2011; revised February 6 , 2011; accepted February 9 , 2011. th th th ABSTRACT A planar magnetoinductive (MI) waveguide loaded rectangular microstrip patch antenna is presented and discussed. The MI waveguide consists of two planar metamaterial split squared ring resonators (SSRRs) placed in between two microstrip lines. The backward wave propagation takes place through this structure. The rectangular microstrip patch antenna is magnetically coupled to the MI waveguide. The unloaded rectangular microstrip patch antenna resonates at 37.10 GHz. When loaded with planar MI waveguide, its resonant frequency is reduced to 9.38 GHz with the bandwidth and gain of 44% and 4.16 dBi respectively. In loaded condition, the dimension of antenna is 12.50 mm ? 3.70 mm (0.390 λ ? 0.115 λ). The appreciable bandwidth is achieved in such a small size antenna. The pass band frequency of MI waveguide is predicted by using the theoretical model of dispersion equation. The effective medium theory is used to verify the metamaterial characteristics of SSRR. The simulated results and theoretical calculations are also presented. The results show that the proposed method can be used to design compact and high bandwidth microstrip patch anten- nas. Keywords: Bandwidth Enhancement, Magnetoinductive Waveguide, Split Squared Ring Resonator (SSRR), Negati