EVA熔体流动速率对PLA/EVA共混物性能的影响.pdfVIP

  • 79
  • 0
  • 约9.42千字
  • 约 4页
  • 2017-05-11 发布于河南
  • 举报

EVA熔体流动速率对PLA/EVA共混物性能的影响.pdf

EVA熔体流动速率对PLA/EVA共混物性能的影响

学兔兔 化 工 进 展 ·l822 · CHEMICALINDUSTRYAND ENGNIEERINGPROGRESS 2014年第 33卷第 7期 EVA熔体流动速率对PLA/EVA共混物性能的影响 葛丽丽 ,吴集钱 ,李锦春 (常州大学材料科学与工程学院,江苏 常州 213164; 山东昊达化学有限公司,山东 滕州 277527) 摘要:通过熔融共混法制备 了聚乳酸 (PLA)/乙烯.乙酸乙烯酯共聚物 (EVA)共混物,采用SEM、DSC、旋转 流变仪等研究了VA质量分数为28%,熔体流动速率 (MFR)不同的EVA对 PLAE/VA共混物性能的影响。结 果表明,EVA熔体流动速率越小,其在PLA基体中分散越均匀,EVA颗粒粒径也越小。共混物的结晶度随EVA 熔体流动速率的增大而增大,但 PLA的玻璃化转变温度 ( )基本不受 EVA的影响。PLA/EVA共混物的复数 黏度和储能模量均随EVA 的熔体流动速率的增高而减小。力学性能测试结果表明,当EVA 的质量分数为 15% 时,PLA的断裂伸长率明显升高,冲击强度约是纯PLA的2倍。 关键词:聚乳酸;乙烯一乙酸乙烯酯共聚物;共混;熔体流动速率;结晶;黏度 中图分类号:O636.1 文献标志码:A 文章编号:1000—6613(2014)07一l822—04 DoI:10.3969/j.issn.1000—66l3.2014.07.028 Effectofmeltflow rateofEVA onthepropertiesofPLA/EVA blends GELili,WUJiqian ,LIJinchun (DepartmentofMaterialsScienceandEngineering,Changzhou213164,Jiangsu,China:HaodaChemicalIndustry Co.,Ltd.,Tengzhou277527,Shandong,China) Abstract:Poly(1acticacid)(PLA)/poly(ethylene—CO-vinylacetate)(EVA)blendswerepreparedby meltblending.TheeffectsofmeltflowrateofEVA (28%VAcontent) onthemorphology,thermal propertiesandrheologicalbehaviorsofPLA /EVAblendswereinvestigated.Theresultsindicatedthat theEVA phasewithsmallerparticlesandbetterdispersioninthePLA matrixwasobservedwhenthe EVAwithlowermeltflow ratewasused.W iththeincreaseofmeltflow rateofEVA,thecrystallinity ofblendswasincreased,thoughthe ofPLA washardlyaffectedbytheadditionofEVA.Andthe complex viscosity and storagemodulusoftheblendswere decreased.Itwasdemonstrated by mechanicalteststhatwiththeadditionofl5% EVA intoPLA,anobviousincreaseinelongationat breakwasobserved,andtheizodnotchedimpactstrengthwasabouttwotimeshig

您可能关注的文档

文档评论(0)

1亿VIP精品文档

相关文档