部分剪力连接钢-混凝土组合梁变形计算的组合系数法.pdfVIP

第35卷 增刊(I) 东南大学学报(自然科学版) Vo1．35 Sup(I) 2005年7月 JOURNAL OF SOUTHEAST UNIVERSITY(Natural Science Edition) 部分剪力连接钢一混凝土组合梁变形计算的组合系数法 王景全 吕志涛 刘 钊 (东南大学混凝土与预应力混凝土结构教育部重点试验室，南京 210096) 摘要：为准确计算部分剪力连接组合梁在考虑滑移效应时的挠度，在对组合梁变形计算的既有方 法进行综合评述的基础上，提出了新的计算方法——组合系数法．采用应力等效的简化方法，分别 推导了无剪力连接和完全剪力连接组合梁的组合系数，并采用插值方法建立了部分剪力连接组合 梁的组合系数．利用该法进行了大量算例的计算，计算结果与理论解析方法和试验结果吻合良好． 组合系数法不需要进行换算截面的计算，而且将无剪力连接、部分剪力连接和完全剪力连接组合梁 的计算方法统一起来．组合系数法形式简单，物理意义明确，计算结果能够满足工程精度要求． 关键词：部分剪力连接；组合梁；变形；组合系数法 中图分类号：U448．21+4；TU398 文献标识码：A 文章编号：1001—0505(2005)增刊(I)．0005—06 Consistency factor method for calculating deformation of composite steel·concrete girders with partial shear connection Wang Jingquan L n Zhitao Liu Zhao (Key Lab of Reinforced Concrete and Prestressed Concrete Structures of Ministry of Education，Southeast University, Naniing 210096，China) Abstract：A new method，referred as consistency factor method，iS presented for calculating the deformation of composite stee1．concrete girders with partial shear connection．First，the state-of-the—art on this subject iS reviewed．A simple formula using the parameters of the consistency factor iS proposed． The consistency factor of non—connection and full—connection composite girders are derived from the equivalent stress method．Then the coefficient of partial connection composite girders is computed by the interpolation method．The result calculated by this method has a good agreement with those obtajned from experiments．The method of composite coefficient need not compute the transform ation section． The degree of shear connection can be taken into account．Consistency factor method Can be used to compute all of me composite steel—concrete girders．The new method is of simple form