Roller Bearing Fault Diagnosis Based on Nonlinear Redundant Lifting Wavelet Packet Analysis 英文参考文献.docVIP

Sensors 2011, 11, 260-277; doi:10.3390/s110100260 OPEN ACCESS sensors ISSN 1424-8220 /journal/sensors Article Roller Bearing Fault Diagnosis Based on Nonlinear Redundant Lifting Wavelet Packet Analysis Lixin Gao 1, Zijing Yang 1, Ligang Cai 1, Huaqing Wang 2,* and Peng Chen 3 1 Key Laboratory of Advanced Manufacturing Technology, Beijing University of Technology, Chao Yang District, Beijing, 100124, China; E-Mail: lead0003@163.com (G.L.) 2 School of Mechanical Electrical Engineering, Beijing University of Chemical Technology, Chao Yang District, Beijing, 100029, China 3 Graduate School of Bioresources, Mie University/1577 Kurimamachiya-cho, Tsu, Mie, 514-8507, Japan; E-Mail: chen@bio.mie-u.ac.jp * Author to whom correspondence should be addressed; E-Mail: wanghq_buct@; Tel.: +86-10-6444-3037; Fax: +86-10-6444-6043. Received: 7 November 2010; in revised form: 20 December 2010 / Accepted: 22 December 2010 / Published: 28 December 2010 Abstract: A nonlinear redundant lifting wavelet packet algorithm was put forward in this study. For the node signals to be decomposed in different layers, predicting operators and updating operators with different orders of vanishing moments were chosen to take norm l p of the scale coefficient and wavelet coefficient acquired from decomposition, the predicting operator and updating operator corresponding to the minimal norm value were used as the optimal operators to match the information characteristics of a node. With the problems of frequency alias and band interlacing in the analysis of redundant lifting wavelet packet being investigated, an improved algorithm for decomposition and node single-branch reconstruction was put forward. The normalized energy of the bottommost decomposition node coefficient was calculated, and the node signals with the maximal energy were extracted for demodulation. The roller bearing faults were detected succ