胶囊咖啡机使用(英文版).docVIP

Preparation before using Open the water tank and fill with water Notice: 1). It requires clean water of normal temperature 2). Close the water tank cover 3). Please make sure to put the water tank in right place Reminder: 1). The water tank could be taken out to clean or fill with water 2. Connect the power, then press the power button and indicator light. Notice: 1). When the Function preset knob is turned to “” position, coffee indicator light starts to blink. The machine is ready to make coffee when coffee indicator light stops blinking. 2). When the Function preset knob is turned to “” position, hot water and steam indicator lights starts to blink. The machine is ready to make hot water or steam when indicator lights stop blinking. How to make coffee 1. Turn the Function preset knob to “” position, coffee indicator light starts to blink. 2. Put the capsule into capsule holder and close the top cover. 3. Put coffee cup below coffee outlet, when coffee indicator light stops blinking, press the coffee button to make coffee. It will automatically stop after 30 seconds or so.( it also can be forced to stop by pressing coffee button again) How to make hot water 1. Turn the Function preset knob to “” position. when hot water indicator light stops blinking, press the button to make hot water. It will automatically stop after 60 seconds maximum. ( it also can be forced to stop by pressing hot water button again) Notice:1). In the process of making hot water, it is not allowed to point the pipe towards any people to avoid scald. How to make steam 1. Turn the Function preset knob to “” position. when steam indicator light stops blinking, press the button to make steam. It will automatically stop after 120 seconds maximum. ( it also can be forced to stop by pressing steam button again) Notice:1). In the process of making steam, it is not allowed to point the pipe towards any people to avoid scald.