导板#183;导盘——浅析二辊斜轧穿孔导围工具与变形过程.pdfVIP

67 x..第S.ß1: 导板·导盘 一一一浅析二辐斜轧穿孔导围工具与变形过程 李群，刘家泳，焦纪纲 (天津钢管集团股份有限公司，天津 300301 ) 摘 要:介绍了二辑斜轧穿孔变形区的组成以及导围工具的发展历程;分析了导板、导盘在穿孔变形过程中 轧件与工具的接触顺序;叙述了导板、导盘在封闭变形区时各自的特点，以及在穿轧试验机上进行的关于导围工 具对穿孔效率影响的试验情况;结合导板、导盘两者的优点，提出了一个关于改造导板安装、使用方式的设想。 关键词:二辗斜轧;穿孔;导围工具;导板;导盘;变形区;变形过程 中图分类号: TG333.8 文献标志码:B 文章编号: 1 ∞1-2311(2014)01-0067-05 Guide Shoe . Guide Disc -A Primary Discussion on Guidíng Too1s for 2-roll Rotary Piercíng Process and Re1evant Deformation Process LI Qun. LIU Jiayong. JIAO Jigang (Tianjin Pipe Group Corporation. Tianjin 300301. China) Abstract: Described in the article are composition of the 2-roll rota巧 piercing deformation zones. and the de- ve10pment history of the guiding too1s. Ana1yzed is the sequence of contact between the workpiece and the operationa1 too l. i.e.. the guide shoe or the guide disc during piercing deformation process. E1aborated are the 8eparate charact- eristic8 of the guide shoe and the guide disc in the closed defo口nation zone. and the result of the test as performed with the piercing test machine for the pu叩ose of identifying the effect by the 伊iding too18 on piercing effjciency. Taking the advantages of both the guide shoe and the guide disc into consideration. an idea for improving installation and operation processes for the guide shoe is put forward. Key words: 2-roll rotary rolling; piercing; guiding too1s; guide shoe; guide disc; deformation zone; defor-