汽车刹车用摩擦片CAPP系统软件开发.pdfVIP

Abstract Friction plate is an important part of automobile brake system, with the rapid development of automobile industry in our country, the demand of the friction material has been increasing rapidly. There are kinds of friction plate, and the same series of product have similar structure lead to lots of repetitive work in the design process of new products , therefore, parametric design has important significance to improve the production efficiency. In this article, We use parametric design in the preparation process of friction plate,developing the CAPP system software V1.0 for friction plate, Using this software we can reduce a lot of calculation and analysis in the process of preparing the same series of friction plate. Achieving the purpose of the automation design, improving the intelligent level of the product design and shorting the product research and development time. The operating platform of this software is VB6.0, through AGW plugin realize the connected and integrated of datas between Pro/E and VB6.0. Development process including the design of program interface and the connection between the software. First using VB6.0 establish the main interface of the system, and then with the AGW and the type library of VB6.0, through writing corresponding codes to realize the connection between the VB6.0 and various software, finally writing the codes for each control then debugging and running application to ensure the software without bug. The system is mainly includes part design module, mold design module, process