阻焊式分层实体制造技术研究.pdfVIP

制造技术/工艺装备 现代制造工程(Modern Manufacturing E咱neering) 2011 年第9 期 阻焊式分层实体制造技术研究 雷建国，罗伟洪，程蓉，伍晓宇 (深圳大学机电与控制工程学院，深圳 5180ω) 摘要:针对纸质材料的分层实体制造方法中存在的缺陷并结合模具的传统制作过程，提出电阻点焊金属分层板的新方 法一一阻焊式分层实体制造，以实现快速、直接制造金属模具的目的。介绍阻焊式分层实体制造双工位系统的基本原 理和系统组成以及各部分的作用，重点分析该方法的工艺过程及焊头的位置控制，并用厚度为O.lmm 的 302 不锈钢薄 板为造型材料进行了试验验证，试验结果表明了该技术的可行性，所得成形件不需后处理便可作为模芯进行注塑，有效 地缩短了模具的制作周期。 关键词:快速成形;分层制造:电阻焊;注塑模具 中图分类号:Tω41 文献标志码:A 文章编号:1671--3133(2011}09一创75--05 Research 00 the technology of lamioated object maoufacture based 00 resistance welding LEI Jian-伊o ， LUO Wei-hong ,CHENG Ro吨，WU Xiao-归 (College of Mechatronics and Control Engineeri吨，Shenzhffi1. University ,Shenzhen 518060 ,Guangdong ,China) Abstract: Combining wi由由e traditional mould production prωess ， puts forw缸danewme血。d ， Laminated Obj回t Manufacture (LOM) based on resistance welding ,for the defects existing in laminated object manufacture of the material. This m拙。dc回回­ alize 由epurp回e of the fast and direct manufacturing the metal mould. Besides , introduces some information of the resistance welding type laminated object manufacturing double-position system such ωthe basic principle ,the system composition and the function of the various parts.ηle process of laminated object manufacturing and the position control of the welding head are intro- duced in detail.四le experiment was carried out based on the material of the 302 stainless steel sheet which thickness is O. 1 milli- meter. 币le study shows 由刨出e t配hnology is feasible. 四le final components do not need post-processing for i叶ection ， so 由e mould manufacturing cycle is shortened efIectively. Key words: rapid prototyping; laminated manufacturing; resistance weldi