高重复频率脉冲激光辐照光学薄膜的温升实验.pdfVIP

第37卷第3期 红外与激光工程 2008年 6月 VO1．37 NO．3 Infrared and Laser Engineering Jun．2008 高重复频率脉冲激光辐照光学薄膜的温升实验 代 福 。，熊胜明 ，高卫东 (1．中国科学院光电技术研究所，四川 成都610209；2．中国科学院研究生院，北京100039) 摘 要：光学薄膜是激光系统中最易损坏的薄弱环节。在高重复频率脉冲激光辐照下，光学薄膜 表面温度急剧上升，导致膜层应力、结构发生变化，最后出现宏观的灾难性损伤。从实验上研究了重复 频率10 kI-Iz脉冲激光辐照下光学薄膜元件的温度变化，分析了影响薄膜温度变化的众多因素。结果 表明，在激光光斑确定的情况下，薄膜的温升主要取决于激光功率密度，其次是膜系最外层高折射率 层的驻波场峰值，最后是膜系的吸收率及镀膜材料。 关键词：重复频率； 激光功率密度； 驻波场峰值 中图分类号：0484．4 文献标识码：A 文章编号：1007—2276(2008)03—0509—04 Temperature rise of optical coating irradiated by a high repetition frequency pulse laser DAI Fu 。。，XIONG Sheng—ming ，GAO Wei—dong (1．Institute of Optics and Electronics，Chinese Academy of Sciences，Chengdu 610209，China 2．Graduate School of the Chinese Academy of Sciences，Beijing 100039，China) Abstract：The optical coatings in laser system can be damaged easily．Th e temperature rises rapidly on the surface of the optical coatings under the irradiation of high repetition frequency pulse laser．Th e stress and structure of films change with the temperature rises．When temperature of films attaches a critical point，such as the melting point of material，its magnificent and catastrophic damage will appear． In this paper，the temperature change of films was studied experimentally under a pulse laser of 10 kHz repetition frequency．Many factors that had effect on the temperature change were analyzed．The results show that under the condition of given laser spot，the temperature rise of films is depend firstly on the power density of laser，secondly on the peak value of standing wave field in the outermost high refractive index layer，and finally on the absor