浅论水泥搅拌桩质量检测方法（Discussion on quality inspection method of cement mixing pile）.docVIP

浅论水泥搅拌桩质量检测方法（Discussion on quality inspection method of cement mixing pile） Discussion on quality inspection method of cement mixing pile Abstract: cement mixing pile construction of large amount, wide surface, and is hidden project, the existing cement mixing pile construction machinery can not automatically and accurately control cement mixing pile construction quality. Therefore, how to test the quality of cement mixing pile construction and implement the effective quality control of cement mixing pile construction process is the problem that the soft foundation treatment project is not well solved and urgently needs to be solved. This paper analyzes the common detection methods and quality evaluation of cement mixing pile, and puts forward some suggestions. Key words: cement mixing pile; quality inspection method; quality evaluation 1 quality analysis of cement mixing pile The quality of cement mixing pile body includes at least 3 aspects: pile strength, mixing uniformity and length of pile body. 1.1 pile inspection method Check method is currently digging pile soft foundation design specification, digging pile pile forming the main view inspection, identification of appearance: the pile is rounded, there is no necking and subsidence phenomenon; mixing is uniform, coagulation are loose; the pile group is flush, spacing is not uniform. At the same time, the full scale pile head can be cut at 50, 150cm and other parts below the pile top to carry out unconfined compressive strength test. 1.2 CPT Should pay attention to the use of light dynamic penetration test of DJM pile when the depth of not more than 4 in; the penetration point not in the pile center, in general, from the pile center 2 / 5 pile diameter, with less cement content in the center, avoid the pile of low strength ash mixing blind, in order to make contact a representative of the penetration; when the feedthrough rod penetrometer must keep vertical. 1.3 static cone penetration test and standard penetr