pcv阀1（PCV valve 1）.docVIP

pcv阀1（PCV valve 1） The PCV is the abbreviation of Positive Crankcase in English (Crankcase forced Ventilation). The Chinese meaning is the Crankcase (or oil sump) active risk control system. PCV valve is composed of valve body, valve, bonnet and spring. Its main role is: the gas within the crankcase through the PCV valve into the intake manifold, and a small amount of air from the air filter the PCV valve directly into the intake manifold, it avoids the throttle ice-covered and burn adequately, the phenomenon such as deterioration of emissions. Prevent the flow of gas into the atmosphere while preventing oil deterioration. The PCV device of device is mainly composed of vent hose and PCV valve. General ventilation hoses are connected through air filter to valve compartment cover, and the other is to connect the PCV valve to the intake manifold. PCV valve is made up of plunger valve and spring, located at the side of the intake manifold, intake manifold vacuum degree determines the PCV valve opening and closing and opening degree, and the extent of the PCV valve open and close and open and determines the leap into gas mixture to the number of suction inlet manifold in combustion. In other words, when the engine constant speed or speed is slow, small gas flow rate, less gas, PCV valve opening smaller or even shut down, and therefore be forced to inhale burning gas and less or even no. When the engine accelerates or the speed is relatively high, the gas flow is large, the gas flow is large, and the PCV valve is large, so it is forced to inhale the combustion. The first crankcase forced ventilation system used in the working process is an open system, which only adds a vent tube with a PCV valve between the inlet pipe and the crankcase. The fresh air in the work process is: the outside world under the effect of inlet vacuum, the oil by adding the place such as flap with atmospheric vent into the crankcase mixes with the crankcase leap into gas, through the PCV valve is s