复合材料工艺介绍（Introduction of composite material process）.doc

复合材料工艺介绍（Introduction of composite material process） 1. Overview of composite material forming process: Composite material forming process is the development foundation and condition of composite material industry. With composite applications to broaden, composite material industry gets rapid development, improving the forming technique of the old, the new molding methods are constantly emerging, the composite material molding method about the following process is widely used in industrial production in domestic, such as: (1) hand paste molding process; (2) injection molding process; (3) casting molding technology; (4) long winding pipe process; (5) continuous winding pipe process; (6) extrusion molding process; (7) bag pressure method (pressure bag); (8) chip molding process (SMC); (9) mass molding process (BMC); (10) thermoplastic sheet plastic manufacturing technology (GMT); (11) vacuum bag pressure forming (vacuum diversion process); (12) resin transfer molding technology (RTM); (13) vacuum auxiliary light quality RTM (l-rtm) (14) other molding processes (abbreviated). From the sequence of the above techniques, the moulds of composite materials are gradually changed from open to semi-open to closed. According to the characteristics of different products, different forming processes are selected according to the different resin matrix materials. (1) the process of production of composite materials, as well as the forming process of products, is completed in the same time. Material performance should be carried out according to the requirements of the products using the design, so in revolt ratio of material, design, determine the fiber layer and forming method, must meet products physical and chemical properties, structure, shape and appearance quality requirements, etc. (2) products molding is easier Usually thermosetting resin matrix of composite materials, before the molding is flowing liquid, reinforced material is soft fiber or fabric, therefore, with these