电扇装置（Fan device）.doc

电扇装置（Fan device） 1. The function and design requirements of the device desktop fan shook his head. The working principle and technological process of 1.2 1.1 working principle of functional decomposition electric fan is the fan air supply area of the cyclical change, achieve the goal of increasing supply area. Obviously, in order to complete the swing of the electric fan, the following motor function requirements should be realized: (1) the fan needs to be swayed by the movement rules, so the corresponding oscillating mechanism should be designed. (2) the fan needs to change the transmission axis and change the rotational speed, so the corresponding gear mechanism should be designed. Motor function of the two institutions for further analysis, know they should achieve the following basic movement respectively: (3) the swinging has three basic movement: movement axis transformation, transmission ratio and periodic oscillation. (4) there is a basic movement of the axis of movement and the change of the transmission ratio: the axis of motion. Also, meet the requirements of transmission performance: change the fan air supply area, the back swing Angle coefficient K = 1.02, the request of the phi 90 °, try to keep a smooth transition and reduce the friction between the institutions. The original data and design requirements 1.3.1 the original data fan diameter was phi 300mm, the motor speed of the electric fan was 1450r/min, and the fan shook the head period T = 10s. Swing Angle fan Ψ = 90 ° and back coefficient k = 1.02. 1.3.2 the design requires that the shaking of the shaking device of a desktop electric fan be designed to swing with a given emergency coefficient and swing Angle to achieve a combined movement of the rotation of the fan blade and the movement of the shaking head. 1.4 design task, page 3, 12 pages of jiangxi agricultural university mechanical principles curriculum design 1. 2. Drawing organization movement schematic diagram. 3. Assign worm gear and gear