焊接工艺手册（Manual welding process）.docVIP

焊接工艺手册（Manual welding process） General welding procedure Release date: 2009-9-29 | reading number: 4651 -------------------------------------------------------------------------------- (turn) general welding process for welding procedure specification 08 2009 Saturday 15 March 16:23 general General welding process (a) 1 General The general process is suitable for our company by manual arc welding, submerged arc welding, welding all kinds of steel pressure vessel TIG and MIG welding technology of CO2. 2 welders 2.1 welders must carry on the test according to the rules examination of boiler and pressure vessel welder, and obtain the qualification certificate of welder, welding can work within the validity period of eligible projects. 2.2 before welding welder must understand the welding steel welding, welding materials, welding technology. 3 welding method The following 3.1 general use of submerged arc weld 3.1.1 10 = 8 below 60 welds; The 3.1.2 diameter is larger than 1000mm and more than 10mm A, Delta B joint inside and outside the mouth; 600mm = diameter 1000mm A, B joint outside the mouth. The following 3.2 commonly used manual welding seam: The 3.2.1 diameter is greater than or equal to 1000mm and less than 10mm A, Delta B joint inside and outside the mouth; 3.2.2 600mm 1000mm diameter A, B joint in the mouth 3.2.3 diameter is larger than 89mm and B over the flange joint outside the mouth; 3.2.4 C and D seam. The following 3.3 general welding using argon tungsten arc welding: The 3.3.1 diameter is greater than or equal to 1000mm and less than 8mm A, Delta B joint backing welding; 3.3.2 600mm 1000mm diameter A, B joint backing welding; 3.3.3 diameter is larger than 89mm and B over the flange joint backing welding; 3.3.4 89mm pipe and flange B seam welding; 3.3.5 drawings by argon arc welding C and D seam welding. The following 3.4 commonly used weld MIG CO2 gas shielded arc welding: Welding skirt and base ring of the 3.4.1 tower; The 3.4.2 container welding