pkpm听课笔记(转自逸飞之家)_ybbxk的建筑结构学习园地（PKPM lecture notes (from Yifei home) _ybbxk building structure learning）.doc

pkpm听课笔记(转自逸飞之家)_ybbxk的建筑结构学习园地（PKPM lecture notes (from Yifei home) _ybbxk building structure learning） Pkpm lecture notes (from Yifei home) architecture of _ybbxk learning architecture Baidu garden space | Baidu home | sign ybbxk learning structure learning The home page blog album | personal files | friends see article Pkpm lecture notes (from Yifei home) 2008-11-13 15:12Pkpm Lecture Notes I. wind load The basic period given in the program is calculated by approximate method. It is suggested that the basic period of the structure is calculated and then re calculated. Two 、 seismic action and structural vibration characteristics 1) for coupling options, recommendations are always adopted; 2) the structure of mass and stiffness distribution is obviously asymmetric, which should be taken into account under the influence of biaxial horizontal seismic action. Example: * * * a 31 story frame structure considering the bidirectional horizontal seismic force, and the average increment of shear weight ratio is 12.35%; * * * rule frame considering two horizontal earthquakes, column reinforcement increases about 10%, little change in other columns; * * * for irregular frames, angle, middle and side column reinforcement, both sides of the earthquake are obviously increased; * * * Through the calculation of two-way seismic force, column by single bias calculation and two-way seismic force and double bias calculation, it can be seen that the reinforcement ratio of the latter column is obviously higher than that of the former. Recommendation: be careful if both the seismic force and the two-way reinforcement of the column are checked at the same time. 3) the influence of accidental eccentricity should be taken into account when calculating one-way seismic force. The accidental eccentricity of 5% is considered from the construction point of view. Consider the accidental eccentricity and increase the internal force of the component 5%~10%; Considering the accidental eccentricity,