跌落试验标准（Drop test standard）.docVIP

跌落试验标准（Drop test standard） Package drop test standard published: 10-05-05 source: Hits: 1903 field selection: large and small Package drop test standard Peoples Republic of China national standard GB/T4857.5-92 instead of GB4857.5-84 Method of drop test for packaged transport packages Packaging-Transport packages-Vertical impacttest method by dropping Transport package drop test in the standard equivalent to the international standard ISO2248-1985 packaging - complete and filled. 1. subject matter and scope: This standard specifies the content of vertical impact testing for performance test equipment, test procedures and test reports for transport packages. This standard is applicable to the evaluation of the protection ability of transport packages under vertical impact the impact strength and packaging of the contents. It can be used as a single test, also can be used as part of a series of experiments. 2. reference standard: Marking method of GB/T4857.1 packaging transport packages of various parts of the GB/Y4857.2 packaging transport packages temperature and humidity conditioning The general principle of GB/T4857.17 packaging transport packages compilation of performance test program The quantitative data of GB/T4857.18 packaging transport packages for the compilation of performance test 3. test principle: filed test samples to a predetermined height, and then make it according to the predetermined state of free fall, collision and impact table. 4. test equipment: 4.1. impact: impact test table for the horizontal plane, does not move, not deformation, and meet the following requirements: A. is a single object, quality is at least 50 times of test sample quality; B. have a large enough area, to ensure that the test sample falls completely in the impact on the table; The impact of C. in the table any two points on the level of clearance was more than 2mm; The impact of 100mm2 on the table D. in any area under static load of 10kg, the deformation amount shall not