塞锥截短对塞式喷管性能影响的实验.pdfVIP

塞锥截短对塞式喷管性能影响的实验.pdf

  1. 1、原创力文档(book118)网站文档一经付费(服务费),不意味着购买了该文档的版权,仅供个人/单位学习、研究之用,不得用于商业用途,未经授权,严禁复制、发行、汇编、翻译或者网络传播等,侵权必究。。
  2. 2、本站所有内容均由合作方或网友上传,本站不对文档的完整性、权威性及其观点立场正确性做任何保证或承诺!文档内容仅供研究参考,付费前请自行鉴别。如您付费,意味着您自己接受本站规则且自行承担风险,本站不退款、不进行额外附加服务;查看《如何避免下载的几个坑》。如果您已付费下载过本站文档,您可以点击 这里二次下载
  3. 3、如文档侵犯商业秘密、侵犯著作权、侵犯人身权等,请点击“版权申诉”(推荐),也可以打举报电话:400-050-0827(电话支持时间:9:00-18:30)。
  4. 4、该文档为VIP文档,如果想要下载,成为VIP会员后,下载免费。
  5. 5、成为VIP后,下载本文档将扣除1次下载权益。下载后,不支持退款、换文档。如有疑问请联系我们
  6. 6、成为VIP后,您将拥有八大权益,权益包括:VIP文档下载权益、阅读免打扰、文档格式转换、高级专利检索、专属身份标志、高级客服、多端互通、版权登记。
  7. 7、VIP文档为合作方或网友上传,每下载1次, 网站将根据用户上传文档的质量评分、类型等,对文档贡献者给予高额补贴、流量扶持。如果你也想贡献VIP文档。上传文档
查看更多
2008年 1月 北 京 航 空 航 天 大 学 学 报 January 2008 第34卷 第1期 Journal of Beijing University of Aeronautics and Astronautics Vo1.34 NO.1 塞锥截短对塞式喷管性能影响的实验 王一白 覃粒子 刘 宇 王长辉 (北京航空航天大学 宇航学院,北京100083) 摘 要:为了研究塞锥截短对塞式喷管性能的影响,对截短率为80%、40%、30%和 20%的塞式喷管进行了冷流实验.介绍了实验系统的组成和推力测量方式,得到了不同塞锥截 短率的推力系数效率的高度特性曲线.实验结果表明:截短率越小,效率越低,不同截短率的效 率差别随着压强比的增加而减小;随着截短率增大,截短率对效率的影响程度逐渐降低.截短 率太小,性能损失较大;截短率太大,塞锥的尺寸增大,而性能提高却不明显.通常的取值范围 是 30% ~40%. 关 键 词:塞式喷管;推力系数效率;截短率 中图分类号:V 430 文献标识码:A 文 章 编 号:1001—5965(2008)O1—001 3-04 Effects of truncation on th rust performance of aerospike nozzles Wang Yibai Qin Lizi Liu Yu Wang Changhui (School of Astronautics,Beijing University of Aeronautics and Astronautics,Beijing 100083,China) Abstract:To discuss the performance effects of plug truncation ratios,cold—flow tests were performed for 80% ,40% ,30% and 20% truncated aerospike nozzles by employing cold air as propellant.The test system apparatus and thrust measurement were introduced.The experimental altitude characteristics curves of the thrust coefficient efficiency were obtained.The results show that the efficiency of aerospike nozzles with bigger truncation ratios is higher than with smaller ratios,and the distinction of different truncations was minished with the pressure ratio increasing.The influence degree of the truncation on the thrust coefficient efficiency falls down by increasing the ratio.The performance loss is more due to selecting too small value of the trunca— tion ratio.With too big ratio value the length of plug is much long,and the weight of plug increases much,but the nozzle performance elevates a little.Generally the truncation ratios can be chosen from 30% to 40% . Key words:aerospike nozzle;thrust coef

文档评论(0)

heroliuguan + 关注
实名认证
文档贡献者

该用户很懒,什么也没介绍

版权声明书
用户编号:8073070133000003

1亿VIP精品文档

相关文档