乳酸生产工艺流程设计.docVIP

******学校 学 士 学 位 论 文 乳酸生产工艺流程设计 姓 名： 学 号： 指导教师： 院系（部所）： 专 业： 完成日期： 枣庄学院学士学位论文作者声明 本人声明：本人呈交的学位论文是本人在导师指导下取得的研究成果。对前人及其他人员对本文的启发和贡献已在论文中作出了明确的声明，并表示了谢意。论文中除了特别加以标注和致谢的地方外，不包含其他人和其它机构已经发表或者撰写过的研究成果。 本人同意学校根据《中华人民共和国学位条例暂行实施办法》等有关规定保留本人学位论文并向国家有关部门或资料库送交论文或者电子版，允许论文被查阅和借阅；本人授权枣庄学院可以将本人学位论文的全部或者部分内容编入有关数据库进行检索，可以采用影印、缩印或者其它复制手段和汇编学位论文（保密论文在解密后应遵守此规定）。 作者签名 日期 年 月 日 各物质的物性参数；Abstract Lactic acid is a great potential for development of fine chemicals, is widely used in medicine, pharmaceutical, leather, textile, environmental protection and agriculture. In recent years, white hot plastic pollution products throughout the world, due to lactic acid poly lactic acid downstream product research and development, poly lactic acid will likely replace the pollution products become the real green environmental protection products. Lactic acid is the current domestic shortage of chemical raw material, but our country lactic acid production scale is very small, can not meet the demand of the society. The lactic acid production methods of fermentation, milk nitrile, propionic acid and acrylonitrile method four kinds. In a great deal of literature at home and abroad in combination with production on the basis of the status quo, this paper chooses milk preparation of lactic acid nitrile. The design of a reference the material property parameters, and access to a large number of chemical engineering design manual and related books, designed for lactic acid production in the entire process, draw the process flow diagram. The design sued in the production of the major equipment of such as reactor, esterification tank, distillation column material balance and energy balance, And the main equipment size and structure of the preliminary design, design the public project, finally carried on the economic analysis and evaluation. Design of the data and process for milk nitrile lactic acid production by industrial production has certain refe