1500td水泥厂生料立磨工段DCS系统设计与开发.doc

摘 要 本设计基于实际工程背景，研究与探讨了生料立磨系统的设计与分析。该系统是将DCS控制系统与工业控制的计算机组态软件系统融合为一体的新型综合集散控制系统。 本设计根据生料立磨生产线的工艺及要求，提出了相应的控制方案。在DCS控制系统的设计，形成了一个比较完善的控制系统各个设备的顺序启动逆序停车实现完善的故障处理。I/O点的建立及管理，实现了对系统的启停及现场运行状态的实时监控，同时完成数据采集、显示、报警 ABSTRACT The design researched and explored the raw material grinding system design and analysis based on pratical engineering background. The system is a new integrated distributed control system which merged DCS control system and industrial control computer system for the integrated configuration softwares. The design propose the corresponding control scheme according to raw material grinding process and production line requirements,. In the DCS control system design, through the system hardware configuration and software design formed a relatively complete DCS control system. Be available to achieve next-to-manual machines control mode, control system for automatic / manual control modes of three,achieve all the equipment of order power and reverse parking；More complete cope with berakdown.In the hardware design analyzes focus on the principle of the electrical equipment. ABBs configuration software CBF was used in configuration software ,monitoring implementation of the program design and the ihterface design，Implementation of the I/Os establishment and management ,meanwhile data acquisition, display, focus on alarm and report etc.Use of CAD drawing software to draw schematic motor control and terminal block connection diagram with the card key. Key words：DCS control system; CBF configuration software; Raw meal grinding；Hardware configuration；Software Design 目 录 摘 要 I ABSTRACT II 1 前言 1 1.1 选题背景 1 1.2 选题的目的与意义 1 1.3 国内外发展现状及存在的问题 2 1.4 设计指导思想 2 2 系统设计方案论述 3 2.1 系统总体方案 3 2.1.1 DCS程序控制功能 3 2.1.2 组态界面监控功能 5 2.2 实施方案与主要研究手段 5 2.3 选题创新之处 6 3 系统工艺流程及控制要求 7 3.1 系统工艺流程 7 3.2 系统总体控制功能 8 3.2.1 生料输送子系统自动控制 9 3.2.2 风路子系统自动控制 9 3.2.3 油站子系统自动控制 10 3.2.4 动力子系统的自动控制 10 3.3 系统电机控制原理 10 3.3.1 普通电机控制原理 10 3.3.2 主电机 11 3.4 系统测温原理