冷式压铸机保养(Cold die casting machine maintenance).docVIP

  • 4
  • 0
  • 约1.86万字
  • 约 15页
  • 2017-10-05 发布于河南
  • 举报

冷式压铸机保养(Cold die casting machine maintenance).doc

冷式压铸机保养(Cold die casting machine maintenance)

冷式压铸机保养(Cold die casting machine maintenance) Cold die casting machine maintenance Maintenance knowledge of cold room die casting machine Column support maintenance The column frame part maintenance cold chamber die casting machine stable working performance of the die casting machine, die casting machine to extend the service life of the very important part of the maintenance of the column frame mainly includes the following two aspects: First, strengthen the lubrication of each movement part of the column frame. Two, regularly adjust the column frame fastening, to prevent loosening. Three, the lubrication of the column frame 1. machine hinge lubrication Machine hinges are usually lubricated with 30# mechanical oil or 68# rail oil. Before starting, check whether the oil distributor of the lubrication system is in good condition and whether the conveying pipes are unblocked or not. Is the lubrication level normal and is the lubrication pressure adequate?. After a long downtime, the machine can be manually lubricated several times, the automatic lubrication time interval is set by the computer program, power to lubricate once, and then automatically press the number of times the lock opening. The number of intervals and the duration of each lubrication are set by the program, and the touch-screen machine can be set by the screen. The setting pressure of the lubricating pump is 15Bar. In the daily production process, check the lubrication system is always good, confirm the lubrication effect, if the lubrication pump damage or lubrication oil pipe fall off, should be repaired in time, never allow without lubrication and boot work. 2. lubrication of medium plate and stern plate The middle plate and stern plate are usually lubricated by grease or grease. The butter, with lithium grease or a molybdenum grease, every 1 months to add a, in the lubrication sufficient conditions, a layer of oil film forming copper company and elder brother Linzhu kinematic pair between the su

您可能关注的文档

文档评论(0)

1亿VIP精品文档

相关文档