文献翻译-配电网络 SCADA 系统中通用接地故障指示器的集成.docVIP

Integration of the Universal Earth-fault Indicator in to the Distribution Network SCADA System Dzintars Baranovskis,Ph.D student, M.Sc.Ing, Riga Technical University; Developing director, Ltd JUMIKS, and Janis Rozenkrons Asoc. Professor, Dr.Sc.Ing. Riga Technical University, Latvia Abstract - This work describes the possibilities for the earth fault detection at the compensated neutral networks and represents one practical solution - a developed universal earth-fault indicator (UEI), which is allowed to detect the earth-faults at the compensated neutral cable networks and the fault detection with the fault indicators, which is connected into distribution network SCADA system by the radio signals. The universal earth-fault indicator is realized as a directional zero-sequence protection device based on comparison of the time when zero-sequence current and zero-sequence voltage occurred with the given time. There are presented block-diagram of the universal earth-fault indicator and working algorithms e.t.c. A pilot project 揑ntegration of the fault indicators into the distribution network SCADA system?has reviewed which was carried out at Jelgava cable distribution networks in theyear 2003. Index Terms ?Electronic equipment, Fault location, Power system reliability, Power quality, SCADA system I. INTRODUCTION. In practice, in the existing cable and overhead distribution networks earth faults and short-circuits frequently occur. Therefore for power engineering companies it is very im-portant to find a faulted place faster and at the least expense. The possibility to detect faults are depend what kind of neutral work regime are used. Low-ohmic earthed, compensated and isolated neutral working regimes are used in Latvian cable networks. Some companies (for example, the Latvian power engineering company 揕atvenergo? for detection of a faulted line have used the cable fault indicators (FIs) in the outgoing lines for detection of faults a