镀铬层等离子弧界面强化机理研究.pdfVIP

硕士论文 镀铬层等离子弧界耐强化机璎研究 r‘62锄。 摘 要 y 为了减少火炮烧蚀、增加火炮寿命，采用转移型和非转移型等离子弧对镀铬 钢件进行扫描处疆，通过金裾分牵斤和电镜扫描分褥、镀菇与基体静结合强度稻硬 度的测量、建立扫描处理时试样瀛度分布模型，指出等离子弧界黼强化厝，由于 镀层中的Cr与基伟Fe发生稆互扩散，界葡基体缀织发生骂氏体稽变，镀罄与基 体之间形成相变硬化层，达到冶众结合，基体微观组织结构改善，界面基体硬度 摄高，基体与镀菇的结合力显著掇高，并指岛使掰菲转移澄等离子弧速行养面强 化是可行的，且工艺效果比用转移型等离子弧优良。 关键词：烧蚀，镀铬，等离子弧，界面强化 疆士谂文 镀铬基等凑子薮裘鬻搓毒艺筑理磅宠 Abstract To reducetheablationof andincreasethe enduranceof artillery it,transferred andnontransferreda档a托usedtoscanthechromiumsteel40Cr plasma plating the andmeasureofadhesive sample．Aftermetaltographicanalysis．SEManalysis andhardnessofthe CO and amodelofthe chromium strength a_dngmatrix，establish distributionof while with concludethat arc，and temperature samplescaningplasma after chromein with diffusionbetween boundary arc，by strengtheningplasma chromium Feinmatrix．structure into martens撼e and ofmatrix coating comingbeing transformationharden of forms，microstructure phase§ransformafion，phaselayer matrix hardness andtheadhesive between improves，matriximproves strength chromittmandmatrix