考虑铸造残余应力的铝合金轮毂载荷分析.PDFVIP

32 5 机 械 工 程 材 料 Vol. 32 No. 5 2008 5 Materials for Mechanical Engineering May 2008 , ( 江苏大学材料科学与工程学院, 江苏镇江212013) : 为实现对含有铸造残余应力的铝合金轮毂铸件外加载荷的有限元分析, 研究了Pro- CAST 软件与ANSYS 软件的接口连接方式; 利用MATLAB 编写了通用接口程序, 并通过某低压 铸造铝合金轮毂产品的运算, 得到轮毂铸件的铸造残余应力; 验证了利用开发的接口程序把有限元 网格的节点信息单元信息和节点的应力信息输入到ANSYS 中的可行性; 利用ANSYS 进行后 续的结构分析计算; 通过轮毂实例的运算验证了车轮在安装后形成的初始动态应力现象 : 铸造残余应力; 接口方式; 接口程序; 有限元模拟 : T G115. 9 : A : 1000-3738(2008) 05-0011-04 Load Analysis of Aluminium Alloy Wheel with Consideration of Residual Stress 库 SU Da-wei, ZHAOYu-tao (Jiangsu University, Zhengjiang 212013, China) 例 Abstract: Aiming at the structure module simulation of the aluminium alloy wheel casting with residual stress, the interface mode of software ProCAST and ANSYS was analyzed. Dat aexchange programs were compiled 案 for the connection of the ProCAST software with ANSYS software in the M AT LAB environment. The dat E exchange programs were certified through an example of low pressure die casting aluminum alloy wheel. The node, A element and six components of the stress tensor at the node files were transmitted into ANSYS software using the interface program. T hen the structure of the wheel was analyzed by the structure module of ANSYS. The C phenomenon of initial dynamic state stress of the assemble wheel was simulated. Key words: casting residual stress; interface code; interface program; finite element simulation 模